CONFIGURING
By default, all TCP/IP-based services on an HCL Domino® server listen for network connections on all NICs and on all configured IP addresses on the server. If you have enabled more than one Notes® network port for TCP/IP (TCP port for NRPC) on either a single Domino server or a Domino partitioned server, you must associate the NRPC ports and IP addresses by binding each port to an address.
About this task
When setting the NOTES.INI variables for port mapping, do not include a zone in a port mapped address. The zone is only valid locally.
Note: Do not change the assigned TCP port number unless you have a way to redirect the inbound connection with Domino port mapping or a firewall that has port address translation (PAT).
Procedure
1. For each IP address, make sure you have added a Notes port TCP/IP. Also make sure that each port has a unique name.
2. In the NOTES.INI file, confirm that these lines appear for each port that you added:
Where TCPIPportname is the port name you defined.
Where IPaddress is the IP address of the specific NIC.
For example:
TCPIP_TCPIPAddress=0,130.123.45.1
Note: Because IPv6 addresses include colons, you must enclose the address in brackets. For example:
TCPIP_TCPIPAddress=0,[fe80::290:27ff:fe43:16ac]
Related tasks Binding an Internet service to an IP address Server setup tasks specific to TCP/IP Setting up Notes named networks Renaming a network port on a server Changing a TCP or TLS port number